Industrial & petrochemical
Industrial and petrochemical project supply
Ahan Assa works on the buyer's side of a project's piping and steel purchase: we check your material take-off (MTO) or BOQ against the standards, compare supplier offers, review the mill certificates and coordinate delivery.
Our role in project procurement
We act as your procurement manager, not as a seller pushing its own stock. Each line of the list is checked for standard, grade, size, schedule or class and the documents required, and the proposal states the exact specification of every item. Industrial items are quoted on request.
Send the project's material list
Send your material list or MTOIs your project in Iraq or Kuwait? Supply to Iraq and Kuwait
What we supply
Seamless and welded pipe
Carbon steel seamless pipe to ASTM A106 and ASTM A53, line pipe to API 5L PSL1 and PSL2; dimensions and schedules to ASME B36.10M.
ASME B16.5 flanges
Weld neck, slip-on, blind, socket weld, threaded and lap joint flanges, Class 150 to 2500, in ASTM A105, A350 LF2 or A182 as your list specifies.
ASME B16.9 butt-weld fittings
90° and 45° elbows, tees, concentric and eccentric reducers and caps in ASTM A234 WPB, A420 WPL6 or A403, with the wall matched to the pipe schedule.
ASTM A516 pressure vessel plate
Carbon steel plate, grades 60 and 70, for vessels and boilers — normalized where required and with the supplementary tests your order states.
Structural sections for the project
Beams, channels, angles and plate for structures, pipe racks and platforms, from the Ahan Assa product catalog.
How project procurement works
1
Send the MTO or BOQ
Send the material list in any form you have: Excel, PDF, a photo or the drawing.
2
Technical check
Standard, grade, size, schedule or class, end finish and required documents are checked line by line; open points are asked.
3
Supplier comparison
Offers are requested for each line and compared side by side on specification, documents and terms.
4
Certificates and inspection
The mill test certificate (MTC) is matched to the order and the heat number; third-party inspection is arranged when you ask for it.
5
Delivery
Place, timing and terms of delivery are written in the proforma and followed up until delivery.
Documents
- Mill test certificate (MTC) to EN 10204 type 3.1, for items whose mill or supplier issues one
- Type 3.2 certificate or third-party inspection, when you request it and as agreed in the proforma
- Proforma with the full specification of every line, commercial invoice and packing list
- Heat number traceability on the material and in the certificate
The certificate type of each item is stated in the proposal before you order; we never promise a certificate the mill does not issue.
What to put in the material list
The more complete the list, the more precise and faster the proposal. Useful columns:
- Item description (pipe, flange, elbow, plate…)
- Standard and grade (e.g. ASTM A106 Gr.B)
- Nominal size (NPS) and schedule or class
- End or facing (BE, PE, RF, RTJ)
- Quantity and unit (m, pcs, t)
- Documents required (MTC 3.1, inspection)
Technical guides
API 5L line pipe for oil and gas pipelines
API 5L specifies seamless and welded steel line pipe at two product specification levels, PSL1 and PSL2; the grade is the minimum yield strength.
ASTM A516 Grade 60 and 70 pressure vessel plate
ASTM A516 is carbon steel plate for pressure vessels in moderate- and lower-temperature service; Grade 70 is the grade most used for vessels and boilers.
ASME B16.5 flanges for industrial and petrochemical piping
ASME B16.5 covers pipe flanges and flanged fittings from NPS ½ to NPS 24 in seven pressure classes; each class's allowable pressure depends on material and temperature.
ASME B16.9 butt-weld fittings
ASME B16.9 sets the dimensions of factory-made butt-weld fittings; each fitting is ordered with the wall of the pipe schedule it is welded to.
Frequently asked questions
Do flanges and fittings have a price list?
No. Industrial items depend on standard, class, material, quantity and documents, so each list is quoted individually.
In what format should I send the MTO?
Excel, PDF, a photo of the list or the drawing; attach up to five files to the enquiry form or send them on WhatsApp.
Do you provide MTC 3.1?
The certificate is issued by the mill or supplier. The proposal states the certificate type of each item before you order, and the certificate received is checked against the order.
Is third-party inspection possible?
Yes, if your request asks for it. Its terms and cost are agreed in the proforma.
Does sending a list commit me to buy?
No. Sending a list is only a request for review and a proposal.
Send the project's material list
Send the MTO, BOQ or purchase list as Excel, PDF or a photo. Our technical team checks it against the standards and proposes sourcing for each line. Industrial items are quoted on request.