Industrial & petrochemical

ASME B16.5 flanges for industrial and petrochemical piping

ASME B16.5 covers pipe flanges and flanged fittings from NPS ½ to NPS 24 in seven pressure classes; each class's allowable pressure depends on material and temperature.

ASME B16.5 sets the dimensions, tolerances, marking and pressure–temperature ratings of flanges from NPS ½ to NPS 24. Larger flanges, NPS 26 and up, are ordered to ASME B16.47 (Series A or B).

Ahan Assa sources flanges to the class, type, facing and material in your list; prices are on request.

Price on request

Flange types

  • Weld neck (WN)
  • Slip-on (SO)
  • Blind (BL)
  • Socket weld (SW)
  • Threaded
  • Lap joint, with a stub end

Facings

  • Raised face (RF): 1.6 mm high for Class 150 and 300, 6.4 mm for Class 400 and above
  • Flat face (FF)
  • Ring-type joint (RTJ), for a metal ring gasket
  • Male/female and tongue/groove

Materials

  • ASTM A105: carbon steel forging, material group 1.1
  • ASTM A350 LF2: carbon steel for low-temperature service, material group 1.1
  • ASTM A182 F304/F304L and F316/F316L: stainless steel

ASME B16.5 class ratings for material group 1.1 (e.g. A105)

ClassRating at −29 to 38 °C (bar)
15019.6
30051.1
40068.1
600102.1
900153.2
1500255.3
2500425.5

These ratings apply at −29 to 38 °C and fall as temperature rises; the value at each temperature is in the standard's rating tables.

Source: ASME B16.5, Pipe Flanges and Flanged Fittings: NPS ½ Through NPS 24 — pressure–temperature ratings, material group 1.1.

What to state in a flange order

  • Flange type (WN, SO, BL, SW…) and NPS
  • Pressure class (150 to 2500)
  • Facing (RF, FF or RTJ)
  • For weld neck flanges: the schedule or wall of the mating pipe
  • Material (A105, A350 LF2, A182…)
  • Quantity, MTC type and inspection

Documents you can request

  • MTC to EN 10204 type 3.1, where the mill or supplier issues it
  • Third-party inspection or a 3.2 certificate, on request and as agreed in the proforma
  • Packing list and heat number traceability

Frequently asked questions

Does Class 150 mean 150 bar?

No. The class is a rating designation; a Class 150 flange of material group 1.1 is rated about 19.6 bar at ambient temperature.

Is a 30-inch flange made to B16.5?

No. B16.5 ends at NPS 24; NPS 26 and above follow ASME B16.47.

Is an A105 flange right for low temperature?

Low-temperature service usually specifies A350 LF2; the piping designer sets the material.

What do flanges cost?

It depends on type, size, class, material, quantity and documents, and is quoted on request.

Send the project's material list

Send the MTO, BOQ or purchase list as Excel, PDF or a photo. Our technical team checks it against the standards and proposes sourcing for each line. Industrial items are quoted on request.