Industrial & petrochemical
ASME B16.9 butt-weld fittings
ASME B16.9 sets the dimensions of factory-made butt-weld fittings; each fitting is ordered with the wall of the pipe schedule it is welded to.
ASME B16.9 covers the overall dimensions, tolerances, ratings and marking of factory-made wrought butt-welding fittings. A fitting is rated as seamless pipe of the same material and wall thickness.
Ahan Assa sources butt-weld fittings to the type, size, schedule and material in your list; prices are on request.
Price on request
Fitting types
- 90° and 45° long-radius elbows (LR, radius 1.5 × nominal size) and 90° short-radius elbows (SR)
- 180° returns
- Equal and reducing tees
- Concentric and eccentric reducers
- Caps and stub ends
Materials
- ASTM A234 WPB: carbon steel, matching A106 Grade B pipe
- ASTM A420 WPL6: carbon steel for low-temperature service
- ASTM A403 WP304/WP316: stainless steel
ASME B16.9 centre-to-end dimensions (mm)
| NPS | OD (mm) | 90° LR elbow | 45° LR elbow | 90° SR elbow | Equal tee |
|---|---|---|---|---|---|
| 1 | 33.4 | 38 | 22 | 25 | 38 |
| 1½ | 48.3 | 57 | 29 | 38 | 57 |
| 2 | 60.3 | 76 | 35 | 51 | 64 |
| 3 | 88.9 | 114 | 51 | 76 | 86 |
| 4 | 114.3 | 152 | 64 | 102 | 105 |
| 6 | 168.3 | 229 | 95 | 152 | 143 |
| 8 | 219.1 | 305 | 127 | 203 | 178 |
| 10 | 273.0 | 381 | 159 | 254 | 216 |
| 12 | 323.8 | 457 | 190 | 305 | 254 |
Outside diameters per ASME B36.10M. The fitting's wall is ordered to the pipe schedule.
Source: ASME B16.9, Factory-Made Wrought Buttwelding Fittings — centre-to-end dimensions; pipe outside diameters per ASME B36.10M.
What to state in a fittings order
- Type (90° LR elbow, 45° elbow, tee, reducer…) and NPS
- Schedule or wall (e.g. SCH40 or STD)
- For tees and reducers: both sizes
- Material (A234 WPB, A420 WPL6, A403…)
- Seamless or welded (S or W)
- Quantity, MTC type and inspection
Documents you can request
- MTC to EN 10204 type 3.1, where the mill or supplier issues it
- Third-party inspection or a 3.2 certificate, on request and as agreed in the proforma
- Packing list and heat number traceability
Frequently asked questions
How do LR and SR elbows differ?
An LR elbow's radius is 1.5 × the nominal size and an SR elbow's is 1 ×; at NPS 4 the 90° centre-to-end is 152 mm for LR and 102 mm for SR.
Does A234 WPB weld to A106 pipe?
Yes; WPB is the fitting grade matching A106 Grade B carbon steel pipe. Order the fitting wall to the pipe schedule.
Do you supply fittings above 12 inch?
Put larger sizes in your list with the full specification for review; the table here shows the common sizes only.
What do fittings cost?
It depends on type, size, schedule, material, quantity and documents, and is quoted on request.
Send the project's material list
Send the MTO, BOQ or purchase list as Excel, PDF or a photo. Our technical team checks it against the standards and proposes sourcing for each line. Industrial items are quoted on request.