Alloy & tool steel
Silver steel 1.2210 (115CrV3)
Ground and polished chromium-vanadium tool steel bar for pins, precision shafts and small tools.
Silver steel ('mil noghrei' in Iran) is a ground and polished tool steel bar; the name comes from its bright surface, and it contains no silver. Its most common grade is 1.2210, 115CrV3: a cold-work tool steel with about 1.2 % carbon and some chromium and vanadium, close to AISI L2.
Silver steel comes with a tight diameter tolerance (usually h8 or h9), so it is ready for pins and shafts without turning. Its old bar standard, DIN 175, has been withdrawn; state the tolerance you need in the request.
A quote for your size and quantity
Send the grade, size, cut length and quantity on WhatsApp or with the form; our sales team reviews it and sends an offer.
Equivalents
- Material number (DIN)
- 1.2210
- EN name
- 115CrV3
- Standard
- DIN 17350
- US equivalent, AISI/ASTM (approx.)
- L2
- Iranian market name
- mil noghrei, silver steel
- Nominal density
- 7.85 kg/dm³
Chemical composition
| Element | Range (%) |
|---|---|
| C | 1.10–1.25 |
| Si | 0.15–0.30 |
| Mn | 0.20–0.40 |
| Cr | 0.50–0.80 |
| V | 0.07–0.12 |
Mass %, ranges of DIN 17350; the heat certificate of the delivered material is what the contract relies on.
Hardness and delivery state
Supplied annealed, at most 220 HB, with a ground and polished surface; it is hardened after machining. It is not stainless and should be kept oiled and dry.
Heat treatment
Hardening at about 780–840 °C; small diameters are quenched in oil and larger ones in water, giving about 64 HRC. Tempering at about 200 °C leaves about 62 HRC, and at 300 °C about 57 HRC. Take the exact temperatures from the producer's datasheet.
Typical uses
- Dowel pins, ejector pins and precision shafts
- Small tools, punches and chisels
- Die and fixture parts
- Heavy wire springs and small wear parts
Delivery forms and size ranges
- Ground bar (silver steel)
- On request
The ranges the market offers, not a stock list. Rounds above about 100 mm are usually forged and traded in diameter bands.
Sizes and weights
Nominal weights at a density of 7.85 kg/dm³ (1.2210). The actual weight is weighed, and tool steel is usually sold by the weight of the cut piece.
| Diameter (mm) | kg per metre |
|---|---|
| Ø 3 | 0.055 |
| Ø 4 | 0.099 |
| Ø 5 | 0.154 |
| Ø 6 | 0.222 |
| Ø 8 | 0.395 |
| Ø 10 | 0.617 |
| Ø 12 | 0.888 |
| Ø 16 | 1.578 |
| Ø 20 | 2.466 |
| Ø 25 | 3.853 |
| Ø 30 | 5.549 |
What to include in your request
- Grade and material number, and the standard if your drawing requires one
- Form: round, flat or block, square or plate
- Exact size: diameter, width × thickness, or plate thickness
- Cut length, or the number and size of pieces, or full bars
- Delivery state: normalised, annealed, pre-hardened or quenched and tempered, turned
- Quantity in kg or tonnes, place and date of delivery
- Preferred origin (made in Iran or imported), if it matters to you
Documents you can ask for
- EN 10204 type 3.1 inspection certificate (heat analysis and hardness)
- Ultrasonic test (UT) report for forged sizes
- Hardness report for pre-hardened or quenched and tempered material
How is a quote for silver steel 1.2210 worked out?
Unlike construction steel, alloy and tool steel has no single daily figure for every size, so none is published here. Each offer is worked out for the request, from these factors:
- Grade and standard: the alloying elements (chromium, molybdenum, vanadium, tungsten, nickel or cobalt) and any required standard or certificate
- Size and form: diameter or section, and round, flat, block, plate or forging; large forged sizes and rarely used sizes are checked one by one
- Cut length and number of pieces: a full bar differs from pieces cut to size, and cutting and weighing are part of the offer
- Delivery state: hot-rolled, annealed, normalised, pre-hardened or quenched and tempered, peeled or ground
- Quantity: a few kilograms for one part or tonnes for production
- Origin and documents: domestic or imported, and an EN 10204 type 3.1 certificate or ultrasonic test if you need one
- Delivery point and timing
For an exact offer, send your list with these details; our sales team reviews it and sends the offer.
Frequently asked questions
What is silver steel 1.2210 steel?
Silver steel ('mil noghrei' in Iran) is a ground and polished tool steel bar; the name comes from its bright surface, and it contains no silver. Its most common grade is 1.2210, 115CrV3: a cold-work tool steel with about 1.2 % carbon and some chromium and vanadium, close to AISI L2.
What is the density of silver steel 1.2210?
The nominal density of 1.2210 is about 7.85 kg/dm³ (g/cm³); the weight table on this page and the weight calculator use this value. The actual weight is weighed.
What is the equivalent of silver steel 1.2210?
1.2210 is listed as 115CrV3 in DIN 17350 (tool steels, withdrawn), and its closest American equivalent is AISI L2. British silver steel (BS 1407) has a slightly different composition; if your drawing names a grade, give its material number in the request.
What tolerance does silver steel have, and does it contain silver?
It contains no silver; the name comes from its polished, bright surface. Silver steel is usually ground to an h8 or h9 diameter tolerance. If you need a particular tolerance or length, state it in the request.
What does a quote for silver steel 1.2210 depend on?
On the grade and standard, the size and form, the cut length or number of pieces, the delivery state, the quantity, the origin and documents, and the delivery point and timing. That is why this group is quoted per request and not listed on the site.
How do I get a quote for silver steel 1.2210?
Send the grade, form and size, the cut length or number of pieces, the delivery state and the documents you need. We review the request and send you an offer.