Alloy & tool steel

High-speed steel 1.3343 (HS6-5-2C / M2)

Tungsten-molybdenum high-speed steel (M2) for drills, milling cutters, taps and cutting tools; round and flat.

In the Iranian market 'khoshke havaei' (air-hardening) or 'tondbor' is the name for high-speed steels (HSS), and 1.3343 is the most common: HS6-5-2C to EN ISO 4957, with about 6 % tungsten, 5 % molybdenum and 2 % vanadium. Its American equivalent is AISI M2.

High-speed steel keeps its hardness at the high cutting-edge temperatures of fast machining better than cold-work steels. Cobalt high-speed steels (such as 1.3243) and higher-alloyed grades are separate grades and should be requested by material number.

A quote for your size and quantity

Send the grade, size, cut length and quantity on WhatsApp or with the form; our sales team reviews it and sends an offer.

Equivalents

Material number (DIN)
1.3343
EN name
HS6-5-2C
Standard
EN ISO 4957
US equivalent, AISI/ASTM (approx.)
M2
Iranian market name
khoshke havaei, tondbor, HSS, M2
Nominal density
8.20 kg/dm³

Chemical composition

ElementRange (%)
C0.86–0.94
Si≤ 0.45
Mn≤ 0.40
Cr3.80–4.50
Mo4.70–5.20
V1.70–2.10
W5.90–6.70

Mass %, ranges of EN ISO 4957; the heat certificate of the delivered material is what the contract relies on.

Hardness and delivery state

Usually supplied annealed, at most 269 HB; the tool is hardened after machining or grinding. The usual working hardness after hardening and tempering is about 64–66 HRC.

Heat treatment

Hardening at about 1180–1230 °C with cooling in oil, nitrogen gas, air or a hot salt bath, then tempering at least three times at about 530–580 °C. The peak hardness, about 66 HRC, is reached near 550 °C. Take the exact temperatures from the producer's datasheet.

Typical uses

  • Drills, milling cutters and taps
  • Saw blades, planer knives and turning tools
  • Punches and cold-work tools under shock load
  • High-speed cutting blades

Delivery forms and size ranges

Round bar
On request
Forged flat and block
On request

The ranges the market offers, not a stock list. Rounds above about 100 mm are usually forged and traded in diameter bands.

Sizes and weights

Nominal weights at a density of 8.20 kg/dm³ (1.3343). The actual weight is weighed, and tool steel is usually sold by the weight of the cut piece.

Round bar
Diameter (mm)kg per metre
Ø 50.161
Ø 100.644
Ø 161.649
Ø 202.576
Ø 254.025
Ø 305.796
Ø 4010.3
Ø 5016.1
Ø 6023.18
Ø 8041.22
Flat and block
Width × thickness (mm)kg per metre
20 × 50.82
30 × 102.46
50 × 104.1
100 × 2016.4

What to include in your request

  • Grade and material number, and the standard if your drawing requires one
  • Form: round, flat or block, square or plate
  • Exact size: diameter, width × thickness, or plate thickness
  • Cut length, or the number and size of pieces, or full bars
  • Delivery state: normalised, annealed, pre-hardened or quenched and tempered, turned
  • Quantity in kg or tonnes, place and date of delivery
  • Preferred origin (made in Iran or imported), if it matters to you

Documents you can ask for

  • EN 10204 type 3.1 inspection certificate (heat analysis and hardness)
  • Ultrasonic test (UT) report for forged sizes
  • Hardness report for pre-hardened or quenched and tempered material

How is a quote for HSS 1.3343 (M2) worked out?

Unlike construction steel, alloy and tool steel has no single daily figure for every size, so none is published here. Each offer is worked out for the request, from these factors:

  • Grade and standard: the alloying elements (chromium, molybdenum, vanadium, tungsten, nickel or cobalt) and any required standard or certificate
  • Size and form: diameter or section, and round, flat, block, plate or forging; large forged sizes and rarely used sizes are checked one by one
  • Cut length and number of pieces: a full bar differs from pieces cut to size, and cutting and weighing are part of the offer
  • Delivery state: hot-rolled, annealed, normalised, pre-hardened or quenched and tempered, peeled or ground
  • Quantity: a few kilograms for one part or tonnes for production
  • Origin and documents: domestic or imported, and an EN 10204 type 3.1 certificate or ultrasonic test if you need one
  • Delivery point and timing

For an exact offer, send your list with these details; our sales team reviews it and sends the offer.

Frequently asked questions

What is HSS 1.3343 (M2) steel?

In the Iranian market 'khoshke havaei' (air-hardening) or 'tondbor' is the name for high-speed steels (HSS), and 1.3343 is the most common: HS6-5-2C to EN ISO 4957, with about 6 % tungsten, 5 % molybdenum and 2 % vanadium. Its American equivalent is AISI M2.

What is the density of HSS 1.3343 (M2)?

The nominal density of 1.3343 is about 8.20 kg/dm³ (g/cm³); the weight table on this page and the weight calculator use this value. The actual weight is weighed.

What is the equivalent of HSS 1.3343 (M2)?

1.3343 is listed in EN ISO 4957 as HS6-5-2C; its closest American equivalent is AISI M2. Equivalents are approximate: if your drawing requires a specific standard, name it in the request.

Why is high-speed steel called 'air-hardening' in Iran?

It is a market name that refers to these steels hardening on a relatively slow cooling; today high-speed steel is usually cooled in oil, gas or a salt bath. The material number matters more than the name: 1.3343 (M2) is the most common HSS, and cobalt grades are different grades.

What does a quote for HSS 1.3343 (M2) depend on?

On the grade and standard, the size and form, the cut length or number of pieces, the delivery state, the quantity, the origin and documents, and the delivery point and timing. That is why this group is quoted per request and not listed on the site.

How do I get a quote for HSS 1.3343 (M2)?

Send the grade, form and size, the cut length or number of pieces, the delivery state and the documents you need. We review the request and send you an offer.