Alloy & tool steel
Cold-work tool steel 1.2379 (X153CrMoV12 / D2)
High-carbon, high-chromium cold-work tool steel for shear blades, punches and cutting dies; round and flat.
Steel 1.2379, X153CrMoV12 to EN ISO 4957, is a cold-work tool steel with about 1.5 % carbon and 12 % chromium, alloyed with molybdenum and vanadium. Its closest American equivalent is AISI D2.
Its many chromium carbides give it high wear resistance, and it is tougher than SPK (1.2080). It also hardens in air with little distortion; even so, in the Iranian market the name 'khoshke havaei' (air-hardening) means high-speed steel (HSS), not 1.2379.
A quote for your size and quantity
Send the grade, size, cut length and quantity on WhatsApp or with the form; our sales team reviews it and sends an offer.
Equivalents
- Material number (DIN)
- 1.2379
- EN name
- X153CrMoV12
- Standard
- EN ISO 4957
- US equivalent, AISI/ASTM (approx.)
- D2
- Iranian market name
- 2379, cold-work 2379, D2
- Nominal density
- 7.70 kg/dm³
Chemical composition
| Element | Range (%) |
|---|---|
| C | 1.45–1.60 |
| Si | 0.10–0.60 |
| Mn | 0.20–0.60 |
| Cr | 11.00–13.00 |
| Mo | 0.70–1.00 |
| V | 0.70–1.00 |
Mass %, ranges of EN ISO 4957; the heat certificate of the delivered material is what the contract relies on.
Hardness and delivery state
Usually supplied soft annealed, at most 255 HB, and hardened after machining. The final hardness depends on the hardening and tempering temperatures.
Heat treatment
Hardening at about 1000–1050 °C with cooling in air, oil or a hot salt bath (about 63 HRC), then tempering: around 200 °C keeps about 61 HRC, while hardening from 1040–1080 °C and tempering above 480 °C gives secondary hardness, needed before nitriding or coating. Take the exact figures from the producer's datasheet for the delivered heat.
Typical uses
- Shear blades and sheet cutting knives
- Punches and dies for blanking and piercing
- Drawing and cold-forming dies
- Cold-rolling tools and wear parts
Delivery forms and size ranges
- Round bar
- On request
- Forged flat and block
- On request
The ranges the market offers, not a stock list. Rounds above about 100 mm are usually forged and traded in diameter bands.
Sizes and weights
Nominal weights at a density of 7.70 kg/dm³ (1.2379). The actual weight is weighed, and tool steel is usually sold by the weight of the cut piece.
| Diameter (mm) | kg per metre |
|---|---|
| Ø 20 | 2.419 |
| Ø 30 | 5.443 |
| Ø 40 | 9.676 |
| Ø 50 | 15.12 |
| Ø 60 | 21.77 |
| Ø 80 | 38.7 |
| Ø 100 | 60.48 |
| Ø 150 | 136.07 |
| Ø 200 | 241.9 |
| Width × thickness (mm) | kg per metre |
|---|---|
| 100 × 20 | 15.4 |
| 200 × 40 | 61.6 |
| 300 × 60 | 138.6 |
| 400 × 100 | 308 |
What to include in your request
- Grade and material number, and the standard if your drawing requires one
- Form: round, flat or block, square or plate
- Exact size: diameter, width × thickness, or plate thickness
- Cut length, or the number and size of pieces, or full bars
- Delivery state: normalised, annealed, pre-hardened or quenched and tempered, turned
- Quantity in kg or tonnes, place and date of delivery
- Preferred origin (made in Iran or imported), if it matters to you
Documents you can ask for
- EN 10204 type 3.1 inspection certificate (heat analysis and hardness)
- Ultrasonic test (UT) report for forged sizes
- Hardness report for pre-hardened or quenched and tempered material
How is a quote for 1.2379 (D2) worked out?
Unlike construction steel, alloy and tool steel has no single daily figure for every size, so none is published here. Each offer is worked out for the request, from these factors:
- Grade and standard: the alloying elements (chromium, molybdenum, vanadium, tungsten, nickel or cobalt) and any required standard or certificate
- Size and form: diameter or section, and round, flat, block, plate or forging; large forged sizes and rarely used sizes are checked one by one
- Cut length and number of pieces: a full bar differs from pieces cut to size, and cutting and weighing are part of the offer
- Delivery state: hot-rolled, annealed, normalised, pre-hardened or quenched and tempered, peeled or ground
- Quantity: a few kilograms for one part or tonnes for production
- Origin and documents: domestic or imported, and an EN 10204 type 3.1 certificate or ultrasonic test if you need one
- Delivery point and timing
For an exact offer, send your list with these details; our sales team reviews it and sends the offer.
Frequently asked questions
What is 1.2379 (D2) steel?
Steel 1.2379, X153CrMoV12 to EN ISO 4957, is a cold-work tool steel with about 1.5 % carbon and 12 % chromium, alloyed with molybdenum and vanadium. Its closest American equivalent is AISI D2.
What is the density of 1.2379 (D2)?
The nominal density of 1.2379 is about 7.70 kg/dm³ (g/cm³); the weight table on this page and the weight calculator use this value. The actual weight is weighed.
What is the equivalent of 1.2379 (D2)?
1.2379 is listed in EN ISO 4957 as X153CrMoV12; its closest American equivalent is AISI D2. Equivalents are approximate: if your drawing requires a specific standard, name it in the request.
Is 1.2379 the 'air-hardening' steel of the Iranian market?
No. 1.2379 (D2) is a cold-work steel that also hardens in air, but in Iran 'khoshke havaei' is the market name of high-speed steels (HSS) such as 1.3343 (M2), used for drills, milling cutters and other cutting tools.
What does a quote for 1.2379 (D2) depend on?
On the grade and standard, the size and form, the cut length or number of pieces, the delivery state, the quantity, the origin and documents, and the delivery point and timing. That is why this group is quoted per request and not listed on the site.
How do I get a quote for 1.2379 (D2)?
Send the grade, form and size, the cut length or number of pieces, the delivery state and the documents you need. We review the request and send you an offer.