Alloy & tool steel
Heat-resistant steel 1.4841 and 310S (1.4845)
Austenitic chromium-nickel heat-resistant stainless steel for furnace parts, baskets and fixtures; round bar and plate.
In the Iranian market 'nasooz' means heat-resistant stainless steel, and 1.4841, X15CrNiSi25-21 to EN 10095, is one of the most used: an austenitic steel with about 25 % chromium, 20 % nickel and 2 % silicon, whose American equivalent is AISI 314.
310S (material number 1.4845) is its sister grade, with less silicon and carbon and better toughness. Datasheets give scaling resistance in air up to about 1150 °C for 1.4841 and about 1050 °C for 1.4845. Other heat-resistant grades, such as 1.4828 (309), are separate grades.
A quote for your size and quantity
Send the grade, size, cut length and quantity on WhatsApp or with the form; our sales team reviews it and sends an offer.
Equivalents
- Material number (DIN)
- 1.4841
- EN name
- X15CrNiSi25-21
- Standard
- EN 10095
- US equivalent, AISI/ASTM (approx.)
- AISI 314 (310S = 1.4845)
- Iranian market name
- nasooz, heat-resistant steel
- Nominal density
- 7.90 kg/dm³
Chemical composition
| Element | Range (%) |
|---|---|
| C | ≤ 0.20 |
| Si | 1.50–2.50 |
| Mn | ≤ 2.00 |
| Cr | 24.00–26.00 |
| Ni | 19.00–22.00 |
| P | ≤ 0.045 |
| S | ≤ 0.015 |
| N | ≤ 0.11 |
Mass %, ranges of EN 10095; the heat certificate of the delivered material is what the contract relies on.
Hardness and delivery state
Supplied solution annealed (1050–1150 °C, cooled in water or air); 1.4841 has at most 223 HB and a tensile strength of 550–750 MPa at room temperature. It does not harden by heat treatment and is non-magnetic.
Heat treatment
It is not hardened; its only heat treatment is solution annealing. Long service at roughly 600–900 °C can form sigma phase and embrittle it, and sulphur-bearing gases lower its resistance; state the service conditions (temperature, gas and load) in the request.
Typical uses
- Furnace and burner internals
- Heat-treatment baskets, trays and fixtures
- Thermocouple sheaths and radiant parts
- Flue parts and hot-gas exchangers
Delivery forms and size ranges
- Round bar
- On request
- Plate
- On request
The ranges the market offers, not a stock list. Rounds above about 100 mm are usually forged and traded in diameter bands.
Sizes and weights
Nominal weights at a density of 7.90 kg/dm³ (1.4841). The actual weight is weighed, and tool steel is usually sold by the weight of the cut piece.
| Diameter (mm) | kg per metre |
|---|---|
| Ø 10 | 0.62 |
| Ø 20 | 2.482 |
| Ø 30 | 5.584 |
| Ø 40 | 9.927 |
| Ø 50 | 15.51 |
| Ø 60 | 22.34 |
| Ø 80 | 39.71 |
| Ø 100 | 62.05 |
| Thickness (mm) | kg per m² | 2000×6000 sheet (kg) |
|---|---|---|
| 3 | 23.7 | 284.4 |
| 5 | 39.5 | 474 |
| 6 | 47.4 | 568.8 |
| 8 | 63.2 | 758.4 |
| 10 | 79 | 948 |
| 12 | 94.8 | 1,137.6 |
| 15 | 118.5 | 1,422 |
| 20 | 158 | 1,896 |
What to include in your request
- Grade and material number, and the standard if your drawing requires one
- Form: round, flat or block, square or plate
- Exact size: diameter, width × thickness, or plate thickness
- Cut length, or the number and size of pieces, or full bars
- Delivery state: normalised, annealed, pre-hardened or quenched and tempered, turned
- Quantity in kg or tonnes, place and date of delivery
- Preferred origin (made in Iran or imported), if it matters to you
Documents you can ask for
- EN 10204 type 3.1 inspection certificate (heat analysis and hardness)
- Ultrasonic test (UT) report for forged sizes
- Hardness report for pre-hardened or quenched and tempered material
How is a quote for 1.4841 / 310S worked out?
Unlike construction steel, alloy and tool steel has no single daily figure for every size, so none is published here. Each offer is worked out for the request, from these factors:
- Grade and standard: the alloying elements (chromium, molybdenum, vanadium, tungsten, nickel or cobalt) and any required standard or certificate
- Size and form: diameter or section, and round, flat, block, plate or forging; large forged sizes and rarely used sizes are checked one by one
- Cut length and number of pieces: a full bar differs from pieces cut to size, and cutting and weighing are part of the offer
- Delivery state: hot-rolled, annealed, normalised, pre-hardened or quenched and tempered, peeled or ground
- Quantity: a few kilograms for one part or tonnes for production
- Origin and documents: domestic or imported, and an EN 10204 type 3.1 certificate or ultrasonic test if you need one
- Delivery point and timing
For an exact offer, send your list with these details; our sales team reviews it and sends the offer.
Frequently asked questions
What is 1.4841 / 310S steel?
In the Iranian market 'nasooz' means heat-resistant stainless steel, and 1.4841, X15CrNiSi25-21 to EN 10095, is one of the most used: an austenitic steel with about 25 % chromium, 20 % nickel and 2 % silicon, whose American equivalent is AISI 314.
What is the density of 1.4841 / 310S?
The nominal density of 1.4841 is about 7.90 kg/dm³ (g/cm³); the weight table on this page and the weight calculator use this value. The actual weight is weighed.
What is the equivalent of heat-resistant steel 1.4841?
1.4841 is listed in EN 10095 as X15CrNiSi25-21, and its American equivalent is AISI 314, not 310. The equivalent of 310S is material number 1.4845. If your drawing names 310 or 310S, state that in the request.
What is the difference between 1.4841 and 310S?
Both have about 25 % chromium and 20 % nickel. 1.4841 (AISI 314) has more silicon and resists scaling to a higher temperature (about 1150 °C); 310S (1.4845) has less carbon and silicon, is tougher, and its limit is about 1050 °C.
What does a quote for 1.4841 / 310S depend on?
On the grade and standard, the size and form, the cut length or number of pieces, the delivery state, the quantity, the origin and documents, and the delivery point and timing. That is why this group is quoted per request and not listed on the site.
How do I get a quote for 1.4841 / 310S?
Send the grade, form and size, the cut length or number of pieces, the delivery state and the documents you need. We review the request and send you an offer.