Steel raw materials

Steel bloom

Semi-finished steel with a larger section than billet; the feed for heavy sections, rails, forgings and seamless tube.

What it is

A bloom is a semi-finished steel product with a square or rectangular section, today mostly made by continuous casting. It is larger than a billet: sections on the market typically run from about 150 to 400 mm. These are typical market sizes, not our stock.

Blooms are rolled directly into heavy sections or first reduced to billets. Round blooms are the feed for seamless tube mills.

Common uses

  • Beams and heavy sections (IPE, HEB and similar)
  • Rails
  • Forgings such as shafts and flanges
  • Round blooms for seamless tube
  • Re-rolling into billets for smaller mills

Common grades

  • Carbon steel 3SP and 5SP to GOST 380
  • St37 and St52 equivalents (now S235 and S355 to EN 10025)
  • Low-alloy and forging grades such as C45, to the buyer's chemistry
  • Rail and tube grades to the standard of the end product

Chemistry and inspection points

  • Carbon, manganese and silicon within the grade range; maximum sulphur and phosphorus
  • Residual elements (copper, chromium, nickel) and nitrogen where required
  • Surface defects: cracks, scabs, laps and the depth of oscillation marks
  • Internal soundness: centre segregation, porosity and pipe; macro-etch test (for example to ASTM E381)
  • Dimensional tolerance: section size, diagonal difference (rhomboidity), straightness, length and the quality of the cut ends

What to include in your request

  • Grade or required chemistry (for example 5SP or an S355 equivalent)
  • Section (square, rectangular or round) and length
  • Quantity in tonnes and the delivery schedule
  • Destination and Incoterm (for example FCA or CPT)
  • Inspection: third-party inspector, sampling and macro-etch

Documents you can ask for

  • Mill test certificate (for example type 3.1 to EN 10204)
  • Dimensional and macro-etch inspection report, if required
  • Export documents for buyers outside Iran